2026 cost guide · North Texas
How much does it cost to drill a water well in North Texas?
Real price ranges, the four things that actually drive the number, and why no honest driller quotes a fixed price before checking your property.
If you're building a home, buying land, or setting up a ranch property, cost is usually the first question about a water well. There is no single answer, and you should be suspicious of anyone who gives you one. Every property is different, so well pricing in North Texas is based on geology, depth, water demand, and the system components your property needs.
The short version
North Texas well costs at a glance
- $11K-$60K+typical complete residential system
- 200-800+ ftlocal well depths, depending on formation
- 2-4 weekstypical permitting time in most counties
- 2-yearwarranty on every well we drill
Larger systems or deeper wells can exceed these ranges depending on geology. Your property may differ.
Typical well drilling cost in North Texas
Most residential and light agricultural wells in North Texas range between $11,000 and $60,000+ for a complete system. Larger systems or deeper wells can exceed this range depending on geology.
That range is wide on purpose. The low end and the high end are both real projects; the difference is depth, formation, and equipment. Here is where the money actually goes.
1. Drilling and casing: billed by depth
Drilling is typically billed by the depth of the borehole. Local well depths in North Texas can vary from 200 ft to more than 800 ft depending on formation and water availability. Harder formations such as limestone and shale increase drilling time and cost.
This is why two neighbors can get very different quotes. Depth depends on which aquifer sits under your land and how deep the water-bearing formation runs there. In most of our service area that means the Trinity or Woodbine aquifer. Before we quote, we study the state well records around your property so the depth estimate is grounded in what nearby wells actually found.
Real local depths
Average depth of our wells on the Texas public record, by county
- Cooke County514 ft
- Denton County499 ft
- Collin County420 ft
- Grayson County333 ft
- Wise County255 ft
Average total depth of Triangle J wells on Texas Submitted Drillers Reports, 2022-2026. Averages, not promises: your property may differ, which is exactly why we check the records first.
2. Pump and pressure system
Every well needs a pump and pressure system to deliver water into the house or property. Depending on your setup, system components may include:
- Submersible pump
- Drop pipe
- Wire
- Pressure switch
- Pressure tank
- Storage tank (if used)
- Booster pump (optional)
Pump system costs vary based on water demand and depth. A deeper well needs more drop pipe and wire, and often a larger pump to lift water the extra distance. Details on how we size and set these are on our pump installation page.
3. Storage tanks and high-demand properties
Ranches, livestock operations, and larger acreage homes may require a storage tank system. Storage tanks allow high-demand usage and buffer pump cycling to extend pump life. If your property fits that description, budget for the storage and pressure system alongside the well itself.
4. Permitting and groundwater districts
Most local wells require permitting through county and groundwater districts. Permitting typically takes about 2-4 weeks in most North Texas counties. Triangle J Water Wells assists with permitting and paperwork for Denton County, Wise County, Cooke County, and surrounding areas, including all groundwater districts. Our permits guide explains which districts operate here and what they ask for.
Why we won't quote you a fixed price over the phone
Because we would be guessing, and you would be the one paying for the guess. Depth drives cost, and depth is set by the geology under your specific property, not by an average. What we can do is check the state well records around your land, walk the site, and give you a free estimate built on real local data. Even then, the formation has the final say: a quoted depth is an informed estimate, not a guarantee of where we find water.
Cost questions
What homeowners ask us about price
Why is the price range so wide?
Because depth and equipment vary that much. A 200 ft well with a basic pump and pressure tank is a very different project from an 800 ft well with a storage tank and booster pump. Geology, water demand, and system components set the number for your property.
Is the estimate the final price?
An estimate is our honest read of your property based on state well records and a site evaluation. The formation has the final say on depth, and harder rock like limestone or shale drills slower. We explain what could move the number before we start, so there are no surprises we could have warned you about.
Do I need a storage tank?
Most single-family homes run fine on a pump and pressure tank. Ranches, livestock operations, and larger acreage homes with high demand may need storage to buffer the pump and keep water available. We'll tell you plainly if your property doesn't need one.
How much time does permitting add?
Typically 2-4 weeks in most North Texas counties, depending on the groundwater district and local requirements. We coordinate and handle most of that paperwork for you. See our permits and districts guide for the details.
Does the price include the pump and everything else?
Our numbers are for complete, turnkey systems: drilling, pump installation, pressure tank, storage if needed, electrical, permitting, and final inspection. One company, one point of contact, one bill, and a 2-year warranty on every newly drilled well.
Get a free estimate for your property
If you're pricing a new well for a home, ranch, or land purchase, we provide free estimates for North Texas properties. Call or text (940) 230-2649 or request an estimate online.